Baker & Sons Air Conditioning Blog

Happy Valentine’s Day from Your Sarasota Area Heating and Air Conditioning Contractor!

February 14th, 2012

Everyone at Baker & Sons Air Conditioning, Inc. wishes you a very happy Valentine’s Day! We hope you have a day filled with lots of candy, flowers, and Valentines! Today is all about showing your appreciation for those you love, including your friends, your family, or your significant other. Take a moment today to think about everyone who makes a difference in your life and how you can let them know how special they are to you.

While traditional gifts like candy and flowers are wonderful idea, why not think a little out of the box this year? Upgrading your HVAC system can make your whole house more comfortable, which is something that your entire family will appreciate! A new air filtration system can help you breathe easier, and a new heating and cooling system can significantly lower your energy bills. While not the most romantic of gifts, it certainly will let your family know that you care.

For more information about how a few HVAC upgrades can make your house more comfortable, give Baker & Sons Air Conditioning, Inc. a call. In addition to making your home cozier, you can also make your friends and family happy by making this delicious recipe for Fudge Truffle Cheesecake:

“When the chocolate addict in you begs for a sweet fix, bake this fluffy chocolate cheesecake over a chocolate cookie crust. Decorate it with even more cocoa delights, such as chocolate-dipped fruit or chocolate whipped cream.”

INGREDIENTS:

1 1/2 cups vanilla wafer crumbs

1/2 cup confectioners’ sugar

1/3 cup unsweetened cocoa powder

1/3 cup butter, softened

2 cups semi-sweet chocolate chips

3 (8 ounce) packages cream cheese

1 (14 ounce) can sweetened condensed

milk

4 eggs

2 teaspoons vanilla extract

DIRECTIONS:

  1. Preheat oven to 300 degrees F (150 degrees C).
  2. In a large mixing bowl, mix together crushed vanilla wafers, confectioners’ sugar, cocoa, and butter or margarine by hand. Press ingredients into a 9 inch springform pan.
  3. In the top of a double boiler, melt the chocolate chips, making sure that they are very smooth.
  4. In a large bowl, beat cream cheese until fluffy with an electric mixer. Gradually beat in condensed milk until smooth. Mix in melted chocolate, eggs, and vanilla. Beat with electric mixer on low speed until the ingredients are thoroughly blended. Pour the filling into the prepared crust.
  5. Bake at 300 degrees F (150 degrees C) for 55 minutes. The cake will seem underbaked in the center, but will continue to cook after you remove it from the oven.

For more details, visit allrecipes.com.

Tags: , , ,
Posted in Holiday | Comments Off

Riverview Indoor Air Quality Guide: Air Filters and Mold

February 13th, 2012

Among the potential problems that can plague Riverview homeowners, mold is particularly frustrating. It is persistent, the spores are tiny and easily spread and it can be hazardous to your health.

Preventing a mold problem involves properly ventilating moist areas, such as bathrooms, to prevent mold from thriving in the moisture. It also means spotting and eradicating any patches of mold that do manage to take hold. Perhaps most importantly, it also means keeping mold out of the air in your home.

Mold particles and spores can readily break off from a mold colony can get into the air. Eventually, they can be drawn up into your HVAC system and redistributed throughout your house. Once airborne, they can settle elsewhere to start new mold growth or wind up in your lungs, potentially causing respiratory problems.

Simply put, having mold in your home is a health risk, so you want to keep it under control as much as possible. The best way to keep out of the air is with an air filter.

The good news is that most mold spores are rather large (relatively speaking), so a HEPA air filter installed in your air handler can remove them from the air pretty easily. They are often 3 microns in size or smaller, so a filter with a MERV rating of 8 should do fine, although some spores can reportedly be as small as 1.5 microns. If you want to be very vigilant, or if anyone is your home has a particularly sensitive respiratory system, you can get a filter with a higher MERV rating of 12 or so.

Also, UV germicidal lights can be a good addition to your HVAC system. These lights emit UV radiation that is safe for humans to be around, but kills many microorganisms, including mold spores. They also kill bacteria and other pathogens that can cause disease.

In addition to proper ventilation, a quality filtration system can effectively eliminate the health risks to your family caused by mold. If you are interested in an indoor air quality system for your home, give Baker & Sons Air Conditioning, Inc. a call!

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

South Sarasota Heating Service – $25 off a Service Call for New Customers!

February 10th, 2012

If you are a long time customer of Baker & Sons AC, you know that we are a company that you can put your trust in. Both our technicians and our service staff take the time to get to know you and your system, and they understand that each situation is different. Truly superior customer services from a custom solution to your problem, as well as respect for your home and a willingness to go the extra mile. Our company tries to meet those goals for each and every service call. We ask that if you have had good experiences with us in the past to recommend us to your friends and family. And we are offering a special deal to new customers- $25 off a Service Call! You know we give great service at a fair price, and with this awesome deal, now is the time to give us a try!

 

Tags: , , , ,
Posted in Promo | Comments Off

Boyette Heat Pump Maintenance Guide: Why Maintain Your System?

February 8th, 2012

Just like any HVAC system, the heat pump in your Boyette home needs routine maintenance and yearly check-ups to operate as efficiently and safely as possible. You also don’t want your heat pump to wear down to the point of a major malfunction or breakdown, which can be costly to repair or may require a complete system replacement.

Here are some things that could go wrong and cost you a lot more in the end if you don’t keep up with the regular maintenance of your heat pump.

Damage to the Compressor

The compressor in a split-system heat pump works whether you are heating or cooling your home. In the winter, the compressor reverses the flow of the refrigerant to defrost the outdoor coils, and in the summer it supplies the refrigerant to cool the home, as well as cooling the outdoor coils. Proper airflow is vital to keeping the compressor running smoothly. Filters that are not changed regularly, dirty coils, and dirty fans can all restrict airflow, which will damage the compressor. Debris around the outside components should also be cleared to allow proper airflow.

Decreased Efficiency

When dirty or broken components restrict the airflow, this damages the compressor and decreases the heat pump’s efficiency levels.  Not only is it important to clean your heat pump regularly, but you should also have it checked by a certified heating technician once a year. This will also prevent safety hazards and other hidden issues with the heat pump.

Improper Refrigerant Levels

Most heat pumps are charged with refrigerant at the factory; however, if models that are charged when they are installed are not given the right amount of refrigerant this can also affect performance levels. Refrigerant leaks and other common problems can be prevented by scheduling an annual maintenance visit with one of our qualified technicians.

Don’t wait until the heat pump in your home stops working, call Baker & Sons Air Conditioning, Inc.  to schedule your yearly check-up.

Tags: , , , ,
Posted in Heat Pump Systems, Heat Pumps | Comments Off

Southgate Unusual Heating Tips: Four Ways to Save Heat That You Might Not Have Considered

February 6th, 2012

Finding new ways to lower the heating bills for your Southgate home is always a challenge. Maybe you’ve already insulated and sealed every crawlspace and crack, or you might have recently upgraded that old furnace, but there are always other ways to reduce heat loss in the winter.

Here are four ways to conserve heat that you might not have considered.

1. Insulate Recessed Light Fixtures

While recessed light fixtures save space and give you more control over lighting and design, such as task lighting in kitchens, they can be a hidden source of heat loss. Feel around your recessed lighting fixtures to see if there’s cool air or a draft. If you do, they could need more insulation. However, you have to be extremely cautious about what type of insulation you use around electrical wiring and fixtures. Check with the manufacturer, or call an electrician if you aren’t sure what  type of insulation to use.

2. Insulate Water Heater Tanks

Part of your heating bill each month goes to heating the water in your home. Whether you have a gas, electric, solar, or hybrid hot water heater, every water heater tank has an R-value that determines how much heat it loses. If you have a low R-value, your tank may need more insulation. Call a professional plumber or check your owner’s manual for the R-value of the model you own, but the general rule is that if the tank is warm when you touch it, you may need to buy a “jacket” for your water heater. These are fairly inexpensive, easy to install, and can be found relatively anywhere you buy insulation.

3. Open Curtains on South End

The southern end of your home will get the most sunlight in the winter. If you have curtains or blinds on your windows or doors, leave them open during the day, and make sure you close them at night. Opening them will help warm up the home naturally during the day, and closing them will help keep the cold air out and warm air in at night.

4. Storm Windows and Doors

Many homeowners know they have the option of upgrading old doors and windows that leak air, but not everyone can afford to upgrade all the doors and windows at once. You can also install storm windows and doors to help reserve heat. Before you start comparing prices, remember to measure, since measurements will affect the cost.

You can always call Baker & Sons Air Conditioning, Inc. whenever you have questions about lowering your heating costs for your Southgate home.

Tags: , , , , ,
Posted in Energy Savings | Comments Off

West Bradenton HVAC Installation Guide: Programmable Thermostats

February 3rd, 2012

Programmable thermostats are one of the best ways to save on heating costs, especially if you have a hard time remembering to turn down the heat in your West Bradenton home. Installing a programmable thermostat will allow you to set the times you want the heat turned up or down. Not only will this make heating your home more consistent and save energy, but it will also allow you to tailor your heating needs to your schedule.

For instance, you can set the thermostat to turn on before you get up in the morning so that the house is already warm when you get out of bed, and conversely, set it to turn down after you go to bed or leave the house for work. Depending on the brand and setting options, programmable thermostats are relatively inexpensive and easy to install.

Although all styles are slightly different, here are some basic instructions that show you how easy it is to install a programmable thermostat.  Remember, this is only a general guide; always check the instructions inside the packaging of your new thermostat before you install it, or check with an electrician.

1. Remove the Old Thermostat

Before you remove the old thermostat, check to see where it’s mounted. If it’s mounted to an electrical box, the voltage used to power the old thermostat may not be compatible with the new one. Ask a certified electrician or West Bradenton heating technician if you aren’t sure.

CUT THE POWER TO THE HEATING SYSTEM TO AVOID ELECTRIC SHOCK. You should always turn off the main power supply to your heating system before installing any new thermostat. If you aren’t sure how to do this, ask your HVAC contractor. Once you unscrew the mounting plate for the old thermostat, just unhook the wires. Don’t throw an old mercury controlled thermostat. You should ask your local waste management facility how to properly dispose of mercury products.

2. Locate all Wires

Wrap the loose wires around a pencil to keep the wires from falling back into the wall. Identify and label each corresponding wire with a letter (do not use color coding since this is not always accurate). Strip the plastic off the ends of the wires about ¼ inch if you need to.

3. Install and Insulate Wallplate

If the area around the new wallplate is larger than the plate, insulate the hole with non-flammable insulation. Take the wallplate off the programmable thermostat and hold it against the wall to mark the screw holes with a pencil. Pull the wires through the large opening at the bottom and screw the plate to the wall.

4. Wiring

Make sure you are comfortable with wiring before you attempt to do any electrical installations. Check the manual for your programmable thermostat for instructions on wiring that specific model. In general, you’ll want to make sure you match the wire labels with the corresponding terminals on the thermostat. Sometimes there will be extra wires that aren’t needed. Always test it before completing the installation. Don’t forget the battery!

5. Install the Faceplate

Once you have it wired correctly, all you need to do is align the brackets on the faceplate with the corresponding slots on the wallplate and fasten the faceplate to the rest of the mounting. Lastly, tighten the screw at the bottom of the thermostat to hold it in place.

If you have any questions regarding programmable thermostats, give Baker & Sons Air Conditioning, Inc. a call.

Tags: , , , , , ,
Posted in Energy Savings, Heating | Comments Off

Snead Island Heat Pump FAQs

February 1st, 2012

Even if you installed a heat pump in your Snead Island home years ago, you may still have questions about the normal operation of your indoor and outdoor units. Here are answers to a few of the more common questions about heat pumps.

Do I need to schedule a heat pump maintenance visit before each season, or just once a year?

Scheduling a yearly maintenance visit is necessary to the proper upkeep and safe operation of your heat pump. This also extends the life of the system and helps it run more efficiently. However, scheduling a visit before the heating and cooling seasons isn’t necessary, unless you’ve had any concerns or issues with your heat pump.

Should I be concerned about the steam coming from my outdoor unit?

All heat pumps have a defrost cycle that melts the frost off of the outdoor coils in the winter. The steam rising from the outdoor unit results from the defrost cycle. If you notice that the defrost cycle lasts longer than ten to fifteen minutes, or if it cycles on and off frequently, you should call a service technician to look at your heat pump. There could be an issue with airflow that is affecting the compressor.

I just installed a heat pump. Why is my furnace running?

Many heat pump systems use the furnace fan blower to help distribute the heat throughout the house. Unless you’ve installed a geothermal heat pump, your furnace is most likely your backup heater, so it will kick on when the outside temperature drops below 20° F.

Is it really that important to clean my outdoor unit? It’s impossible to keep it clean all the time.

Yes, cleaning the outdoor unit is an especially important maintenance task. Not only does a routine cleaning of all the outdoor components maintain your heat pump’s efficiency and performance levels, it also prevents safety hazards. When you schedule a yearly maintenance visit with one of our technicians, cleaning the coils and outdoor unit is part of the service; however, if you want to clean the coils yourself, have one of our technicians show you how to do this before you attempt it on your own. You could suffer from electric shock if you are not familiar with the proper cleaning procedure. You can also help by making sure that the debris is cleared from around the outdoor unit.

If you have any questions about the heat pump in your Snead Island home, or if you’d like to schedule a maintenance appointment, give Baker & Sons Air Conditioning a call any time.

Tags: , , , , , , ,
Posted in Heat Pumps | Comments Off

Palmetto Heat Pump Tip: Outdoor Maintenance

January 30th, 2012

Sometimes, the trickiest part about owning a heat pump in Palmetto is keeping the outdoor components maintained. Because they are outside and generally out of sight, it can be easy to forget or neglect them. But because they are outside and exposed to the elements, outdoor heat pump components need attention and maintenance to keep them running properly.

The two most important routine maintenance functions you can do as an owner of an outdoor heat pump are keeping it free of debris and keeping it level.

Every month or so, inspect and clean your outdoor heat pump to make sure it is free of leaves, dirt and other debris. These can easily be sucked in by the fan and reduce the efficiency of the whole system. Turn the power off to the unit and use a vacuum or broom to remove any accumulated debris.

Once or twice a year, use a carpenter’s level to make sure the whole thing is sitting level on the pad. Use the level to gauge both side to side and front to back. While you are doing this, check the insulation for erosion or gaps. If you see that it is not level or the insulation is wearing thin, have a contractor come out reset the unit on the concrete pad or patch up the insulation.

These are two small maintenance tasks that you don’t have to do very often, but they can make a big difference in the performance and life of your heat pump.

In addition, you should always have your whole heating, ventilation and cooling system inspected by a Palmetto professional annually in order to keep everything maintained and in good repair.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Bee Ridge Heat Pump Repair Tip: How to Handle Your Finicky Heat Pump

January 27th, 2012

A heat pump is designed to keep your Bee Ridge home comfortable. Warm weather, cold weather – it doesn’t matter. It should turn on when you need it and turn off when you don’t. So, when the device starts turning on and off without reason or when you need it to stay on, what exactly is the problem and how can you fix that problem without losing the heating or cooling capacity of your device.

Common Causes of the Problem

There are a number of reasons why your heat pump would turn off shortly after turning on, and most of the time this occurs in heating mode. If it occurs in cooling mode, you should have the device inspected immediately because there is likely something wrong with a core component like the compressor. For heating mode issues, here are some common problems:

  • Dirty Coils – If the coils are dirty, the device won’t be able to properly operate, especially if it has been some time since the last cleaning. Both sets of coils need to be cleaned at least once a year to avoid this becoming a problem.
  • Low Refrigerant Charge – If the refrigerant gets low, you’ll need to have it recharged because the pressure in the device will drop and it will therefore turn off after a few minutes of use.
  • Defrost Timer – If the defrost timer is forcing the device into a defrost cycle too often (usually it is set to 30, 60, or 90 minutes), the fan might turn off every few minutes after turning on. This is a common problem and is usually due to a thermostat or switch issue which can be fixed relatively easily.

Another thing to ask yourself when this problem occurs is whether the device is heating properly when on. Defrost timer issues don’t usually impinge on the heating ability of the device, while low refrigerant can. You want to make sure the device is working properly when on and not just cycling on and off without heating capacity.

Based on what you find, you’ll need a Bee Ridge technician to take a closer look and ensure everything is working properly. Most repairs for this type of problem are relatively simple.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Bradenton Heating Installation Question: Is Geothermal for Me?

January 25th, 2012

Geothermal heating is a great alternative to other types of home heating systems in Bradenton. It is safe and efficient, costs very little to operate and makes use of a great renewable resource right below our feet. But is it right for you? Well, geothermal heating may be the right choice for many people, but there are many things to take into account before you can determine whether or not it is the best choice for your home.

The first important thing to understand when you are trying to decide whether or not to go with geothermal heating is how one of these systems actually works. A geothermal system heats your home by extracting heat from the ground and then transferring that heat into your indoor air. This happens when liquid, usually water or antifreeze, passes through a loop of pipes installed several feet below the ground.

The liquid absorbs heat from the ground, which in the winter is always warmer than the air, and carries is back up to an air handler inside your home where that heat is allowed to disperse into the air. Once the air is heated, the air handler blows the air through a system of ducts throughout your house, providing a constant stream of heated air to all areas of your Bradenton home. The liquid, on the other hand, simply cycles back through the ground loop to pick up more heat and repeat the same cycle over again.

Because a geothermal heating system does not actually generate heat, it requires very little energy to operate. This means that it is both very cheap for you to run and environmentally friendly. But since installing a geothermal heating system involves putting pipes in underground, it can be pretty expensive initially. However, as long as the amount you save every month on your heating costs is enough to offset the high initial price of installation, it is worth it to put down the money up front.

Another alternative, of course, is a more traditional air source heat pump. These are much cheaper to install and nearly as cheap to run. However, air source heat pumps are not as efficient when the air temperature gets below freezing as a geothermal system can be.

Tags: , , , , ,
Posted in Geothermal | Comments Off

« Older Entries
Newer Entries »